1. Home
  2. Pro Tuning Freaks Vancouver

Pro Tuning Freaks Vancouver

SPLxPTF
Car Services

SPEED PROJECTS LAB – Home of Pro Tuning Freaks Vancouver, Creators of BootMod3 (BM3)

To further bring more ECU Tuning options for BMW models, we have partnered with Pro Tuning Freak (PTF) and we are their sole location in Vancouver! At Speed Projects Lab, we will be providing DME Unlocking, Licensing, and Tuning  through OBD2 service for

  • BMW F80 F82 M3 / M4 (S55) – BM3 Beta
  • BMW F2X F3X 228I 328I 428I 235I 335I 435I 535I 640I X3 X4 X5 M2 (N55, N20, N26) – BM3 Beta
  • F1X F8X 550I 650I M5 M6 X5M X6M (S63TU N63TU) – BM3 Beta

What is BM3?

Up until bootmod3 came into existence there were two popular ways of tuning the BMW F series, using a piggyback device to add boost and sending your ECU (DME) out for a one time flash to a tuner of your choice. With the piggyback the end user has partial control over the boost the car is running but no direct control over any other engine parameters such as ignition timing, lambda targets, fuel pressure targets, torque/load targetting, throttle mapping, valve timing and duration, among others. BM3 allows end user to customize their tune for different modifications, octane levels, go bigger turbos, built motor, datalog how the car was running, to get the most performance out of their car.

bootmod3 is a full custom tuning platform for the factory engine computer (ECU/DME) that provides the end user with mobile applications for Android, iOS and Web Browser enabled devices. Users can change their tunes through the OBD port at will using the mobile apps taking about a minute to do so. In order to enable OBD map switching and programming on the BMW F series cars a one-time removal of the ECU(DME) from the car is required to apply what is commonly referred to as the OBD unlock. It is a software patch that allows OBD programming access to the factory engine computer. From that point forward the user is free to change their maps/tunes in the convenience of their driveway, at the track, on the dyno or wherever and whenever you’d like to do so.

BMW F80 F82 M3 / M4 (S55) - BM3 Beta

  1. Mobile app (iOS and Android) and Web (http://www.bootmod3.net)
  2. One OTS map/tune included with the purchase and any other maps labeled as “FREE”
  3. Datalogging over 200 diagnostic channels, up to 40 channels concurrently
    • Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
  4. Cloud based storage for map data and datalogs
  5. GTS Transmission Flash INCLUDED for DCT equipped vehicles
  6. Reverting back to stock performance map and re-locking the DME to stock programming
  7. Live Dash – realtime vehicle parameter monitoring via in-app guages
  8. Diagnostics
    • Read and clear trouble codes in all vehicle modules
    • Reset learned adaptations (octane, knock, Valvetronic, etc)
    • ECU power reset
  9. (Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane
  10. (Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.

Some of the map features provided:
– Map Customization through Map Editor
– Top speed limiter removal
– Higher rev limiter
– Exhaust burble (GTS, custom, aggressive mode), switchable with the steering wheel controls in efficient vs. sport mode
– GTS Startup Roar
– GTS DCT Transmission flash
– Recalibrated Sport Gauges on iDrive
– Cold start cat heat cycle and cat efficiency check removed (for off-road use)
– Maps for upgraded turbos
– E85/blend, race gas and meth injection tuning
– Custom Throttle mapping
– Backend Flash maps for use with piggybacks such as the JB4

BMW F2X F3X 228I 328I 428I 235I 335I 435I 535I 640I X3 X4 X5 M2 (N55, N20, N26) – BM3 Beta

  1. Mobile app (iOS and Android) and Web (http://www.bootmod3.net)
  2. One OTS map/tune included with the purchase
  3. Datalogging over 200 diagnostic channels, up to 40 channels concurrently
    • Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
  4. Cloud based storage for map data and datalogs
  5. Reverting back to stock performance map and re-locking the DME to stock programming
  6. Live Dash – realtime vehicle parameter monitoring via in-app guages
  7. Diagnostics
    • Read and clear trouble codes in all vehicle modules
    • Reset learned adaptations (octane, knock, Valvetronic, etc)
    • ECU power reset
  8. (Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane
  9. (Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.

Some of the map features provided:
– Top speed limiter removal
– Higher rev limiter
– Exhaust burble
– Cold start cat heat cycle and cat efficiency check removed (for off-road use)
– Maps for upgraded turbos
– E85/blend, race gas and meth injection tuning
– Custom Throttle mapping
– Backend Flash maps for use with piggybacks such as the JB4

F1X F8X 550I 650I M5 M6 X5M X6M (S63TU N63TU) – BM3 Beta

  1. Mobile app (iOS and Android) and Web (http://www.bootmod3.net)
  2. One OTS map/tune included with the purchase and any other maps labeled as “FREE”
  3. Datalogging over 200 diagnostic channels, up to 40 channels concurrently
    • Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
  4. Cloud based storage for map data and datalogs
  5. Reverting back to stock performance map and re-locking the DME to stock programming
  6. Live Dash – realtime vehicle parameter monitoring via in-app guages
  7. Diagnostics
    • Read and clear trouble codes in all vehicle modules
    • Reset learned adaptations (octane, knock, Valvetronic, etc)
    • ECU power reset
  8. (Optional) Off the shelf (OTS) tunes for 91/93 octane
  9. (Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.

Some of the map features provided:
– Map Customization through Map Editor
– Top speed limiter removal
– Higher rev limiter
– Recalibrated Sport Gauges on iDrive
– Cold start cat heat cycle and cat efficiency check removed (for off-road use)
– Maps for upgraded turbos
– Custom Throttle mapping
– Backend Flash maps for use with piggybacks such as the JB4